Moon YH  Lee JE  Yu GD  Cha YL  Song YS  Lee KB

Vol. 22,  No. 4, pp. 286-291, Dec.  2016
10.7464/ksct.2016.22.4.286

Miscanthus Pellet Quality Combustion

PDF

In this study we made fuel pellet from miscanthus biomass and investigated changes of physiological characteristics and electricity consumption of pelletizing process in comparison with fuel pellet made of pine sawdust. We also examined combustion characteristics including ash content and clinker forming ratio with fuel pellet made of mixing with micanthus biomass and lime powder. Bulk density of ground-miscanthus and pine sawdust were 158 g L-1 and 187 g L-1, respectively. Bulk density of ground miscanthus was lower than that of pine sawdust, but increased to 653 g L-1 after pelletizing, which was similar to 656 g L-1 of pine sawdust pellet. Moisture content in raw miscanthus and ground miscanthus were 17.0% and 11.8%, respectively. Moisture content in ground miscanthus was similar to that of pine saw dust and decreased to 6.73% after pelletizing, which was 7.7% lower than that of pine sawdust pellet. Although 27 kWh ton-1 were required for compaction press that was an additional process in miscanthus pelleitizing, total required electricity was 193 kWh ton-1 which was similar to 195 kWh ton-1 of pine sawdust pellet pelleitizing. Pellet durability and pelletizing ratio of miscanthus were 98.0% and 99.7%, respectively, which were similar to 98.1% and 99.4% of pine sawdust pellet. When lime mixing ratio increased, ash melting degree and clinker forming ratio of miscanthus pellet increased. While higher heating value and clinker forming ratio of miscanthus pellet decreased.